News Careers
pattern

NOFOAM SBE10

NOFOAM SBE10 is a silicon based defoamer ideally suited to prevent foaming in drilling fluids as well as solids free workover and completion fluids.

NOFOAM SBE10 Product category
WBM Drilling
NOFOAM SBE10 Category
Defoamers
NOFOAM SBE10 Physical State
Liquid
right-pattern
Typical Physical & Chemical Properties
Max Temperature
300
Reservoir Compatible
Both
Sub Category
Silicone Base
Product Tier
Regular
SG value
1
Appearance
Milky white uniform emulsion
pH (Neat)
6.0 - 9.0
Specific Gravity (25 ˚C)
0.99 - 1.0
Flash Point
>100 ˚C
Feature And Benefits
NOFOAM SBE10 is effective to eliminate foam associated with mixing and circulating brines. NOFOAM SBE10 will control foaming in dispersed and non–dispersed drilling fluid systems. NOFOAM SBE10 will prevent re–foaming
Product Function
NOFOAM SBE10 is normally utilized in controlling foam in brines and is effective in most water base drilling fluid systems. It can be used as antifoam as well as a defoamer in these systems.
Recommended treatment
Pre–treatment to make up water is recommended for best results. Normal treatment is 0.5–1 gal/100 bbl (0.12–0.24 liters/m3).
Shipping References
NOFOAM SBE10 is not restricted by any regulatory agency.
Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Utilize appropriate respirator, gloves, goggles and apron. Refer to the Material Safety Data Sheet (MSDS) for this product prior to use.
Standard Packing
NOFOAM SBE10 is packaged in 5 USG pail or 55 USG (208 liters) drum.
Download Product Bulletin Get Quote